2024 Guide to Fitting Plastic Skirting Board

Link to RAITTO

Related links:
Top Benefits of Choosing Plastic Skirting Boards

Choosing the Right Plastic Skirting Board

When embarking on your home renovation project, selecting the right plastic skirting board is essential. Plastic skirting boards are popular due to their durability, resistance to moisture, and easy maintenance. They come in various styles, sizes, and textures, allowing you to find one that complements your home’s aesthetic. Before purchasing, measure the height and length of the area you wish to cover. It's crucial to choose a style that fits seamlessly with your interior design, whether it’s modern or traditional.

Preparation Before Installation

Preparation is key to a successful installation of plastic skirting boards. Start by removing any existing skirting boards to ensure a clean surface. Use a utility knife to cut through the paint and caulking around the old boards for easier removal. Once cleared, clean the wall surface to remove dust and debris. This prevents any unwanted imperfections in the final finish. Additionally, ensure that you have all the necessary tools at hand, such as a measuring tape, a saw (preferably a miter saw for angled cuts), adhesive or nails, a level, and a caulking gun.

Measuring and Cutting the Skirting Board

Accurate measurements are critical. Measure the length of each wall where the skirting board will be installed. Mark these measurements on the plastic skirting board, ensuring you account for any corners or obstacles. For inside corners, a 45-degree angle cut will create a seamless look, while outside corners will require miter cuts on both boards. Employ a miter box or a miter saw to achieve precise angles. When cutting, always double-check your measurements to minimize waste and avoid mistakes.

Installing the Plastic Skirting Board

Once you have your skirting boards cut to size, it’s time to install them. Start at one corner and work your way around the room. Apply adhesive or place nails into the wall and back of the skirting board as needed. If using adhesive, ensure it is specifically designed for plastic to guarantee proper bonding. Press the skirting firmly against the wall and floor, using a level to ensure it is straight. For areas with gaps, you can use caulk to fill these spaces for a polished finish.

Finishing Touches

After your skirting boards are installed, it’s time for the finishing touches. Fill any nail holes with a suitable filler and sand down any rough edges. A final coat of paint or stain may also enhance the overall look, although many plastic skirting boards come pre-finished. When applying, ensure you work in a well-ventilated area. Once dry, inspect the entire installation for any imperfections. This step ensures your new skirting boards not only look good but also enhance the overall appearance of your space.

Maintenance and Care

Plastic skirting boards are relatively low-maintenance, but regular cleaning will keep them looking fresh. Simply wipe them down with a damp cloth to remove dust and dirt. For tougher stains, a mild detergent can be used. Avoid abrasive cleaners that may scratch the surface. If your skirting board incurs any damage, plastic repair kits are available and can restore their original look. In conclusion, fitting plastic skirting boards can enhance the aesthetic appeal of your home while providing durable protection. By following this guide, you can ensure a professional-looking installation. Should you have any questions or require further assistance, please do not hesitate to contact us.

Check now